Scope This data sheet gives test procedures to measure mouth-base parallelism for flaconnage articles made of moulded glass. The parallelism of the upper surface of the finish with respect to the base bearing surface should comply with the requirements of the closure system to be used on the glass container
Managing Empty Containers Fact Sheet Department of The empty container management requirements discussed in this fact sheet pertain to containers and their liners that are 119 gallons or less in volume. Those who manage containers with a capacity of greater than 119 gallons (bulk containers) must follow the requirements given in California Code of Regulations, title 22, section 66261.7(p) .
ASTM's paper and packaging standards are instrumental in the evaluation and testing of the physical, mechanical, and chemical properties of various pulp, paper, and paperboard materials that are processed primarily to make containers, shipping boxes and parcels, and other packaging and labeling products.
Strawberries Grades and Standards Agricultural Marketing No part of any tolerance shall be allowed to reduce for the lot as a whole, the percentage of U.S. No. 1 strawberries required in the combination, and individual containers (cups or baskets) may have not less than 65 percent U.S. No. 1 strawberries:Provided, That the entire lot averages within the required percentage. For off-size.
TECHNICAL SPECIFICATION FOR STEEL DRY CARGO STEEL DRY CARGO CONTAINER 20 x 8 x 96 High Cube I N D E X Section Title Page 1 General 2 2 Dimensions and Ratings 4 3 Materials 5 4 Construction 6 Tare Weight Tolerance 2% 3. Materials 3.1 General The following materials will be used in the construction of containers. 4 3.2 Part specification Parts Materials by JIS
Container eliminates the risks in transferring liquids from one vessel to another, and provides for an extremely safe, secure, cost effective, and viable mode of transportation. Once the Tank Container has discharged, it is taken to a recognized cleaning station, cleaned thoroughly for that product, and then made ready for its next load.
United States Department of Persian (Tahiti) Limes The tolerances of the U.S. Standards for Grades of Persian (Tahiti) Limes are determined on the basis of count. Examine a minimum of 25 limes from containers with 25 or more fruit (including bulk bins). The entire contents of containers shall be examined for packages with less than 25 fruit, regardless of the quality or condition of the lot.
Water-based flexographic ink specifications and the print within tolerance UPC symbols on single-wall corrugated board" (1990). Thesis. Rochester Institute of Technology. Accessed from ontario Containers 14 Deming Way Medina, New York 14103 716-798-4400 Date. ABSTRACT. THE EFFECT. WATER-BASED FLEXOGRAPHIC. INK. STANDARDS HAVE ON UPC. SYMBOLS. PRINTED ON COMBINED. CORRUGATED.