Carpenter Invar "36" alloy is a 36% nickel-iron alloy possessing a rate of thermal expansion approx. one-tenth that of carbon steel up to 200°C. This alloy has been used for applications where dimensional changes due to temperature variation must be minimized, such as in radio and electronic devices, aircraft controls, optical and laser
INVAR 36 - Rolled Alloys, Inc.INVAR 36 INVAR 36 is a nickel-iron, low-expansion alloy containing 36% nickel. It maintains nearly constant dimensions over the range of normal atmospheric temperatures, and has a low coefficient of expansion from cryogenic temperatures to about 500°F. The alloy also retains good strength and toughness at cryogenic temperatures.
INVAR 36 Technical Data Sheet Nominal Chemical Composition:36 % Nickel, Balance Iron Expansion:cm/cm/°C x 10-6 25° C to 350° C 6.60 25° C to 600° C 11.35 25° C to 100° C 1.18 25° C to 400° C 7.82 25° C to 700° C 12.70 25° C to 200° C 1.72 25° C to 450° C 8.82 25° C to 800° C 13.45
Invar - espimetalsOther:Iron-Nickel Alloy 36, Low Expansion Alloy. Supplier:ESPI Metals. 1050 Benson Way. Ashland, OR 97520. Telephone:800-638-2581. Fax:541-488-8313. Email:[email protected] Emergency:Infotrac 800-535-5053 (US) or 352-323-3500 (24 hour) Recommended Uses:Scientific Research.
Invar 36 Controlled Expansion Alloys - Ed FaganInvar 361 DESCRIPTION A low expansion alloy, consisting of 36% Nickel, balance Iron. This alloy exhibits extremely low expansion around ambient temperatures and is often used where minimum expansion is required. APPL ICA TIONS Optoelectronics, optical and laser benches, electronics, and scientific instruments. AKA:Invar 361, Pernifer 362, NILO
Invar 36 alloy is available in two variations. The first is the conventional Invar alloy, typically used for its optimum low expansion properties. The second is a variation of the basic alloy known as Free-Cut or Free-Machining (UNS K93050 and ASTM F1684).
Invar 36 Plate Nickel Alloy 36 Sheet/ 1.3912 Strips supplierDifference between Invar 36 Sheet, Plate & Foil Thickness less than 0.15mm is called a Alloy 36 Foil. Thickness greater than 0.15 mm and less than 6.35mm is called a Nickel Alloy 36 Sheet. Thickness greater than 6.35 mm is called a Invar 1.3912 Plate.
Invar 36 Tech Data - High Temp MetalsInvar 36 is a 36% nickel-iron alloy possessing a rate of thermal expansion approximately one-tenth that of carbon steel at temperatures up to 400°F (204°C)
18 rows · Thermally Stable Invar 36 Nickel Alloy Sheets. Yield Strength:40, 000 psi. Hardness:
Invar With Material Certification McMaster-CarrSpecifications Met:ASTM F1684 Because Invar 36 holds its size and shape when temperatures rise, this nickel-iron alloy is the go-to material when dimensional stability is required. It is commonly used when precision is a priority, such as for scientific instruments and optical devices.
Nickel Alloy 36, Invar® 36, Nilo® 36 - Continental Steel Alloy 36 is nickel-iron low-expansion super alloy, that is sold under the brand names Nickel Alloy 36, Invar 36® and Nilo® 36. One of the main reason people chose Alloy 36 is its specific capabilities under a unique set of temperature constraints. Alloy 36 retains good strength and toughness at cryogenic temperatures due to its 
Here we have provided easy access to Safety Data Sheets (SDS) pertaining to many of the products carried by Washington Alloy. (Invar® 36) Phos-Copper Brazing Alloy. RCI Rod 2019 Silver Brazing Alloys Silver Brazing Kits Soapstone Solder- Lead-Free Solders Solder- Lead SoldersInvar 36 Alloy 36 Plate-Sheet-Distributor-Round Bar Invar 36 is a low expansion nickel-iron alloy that contains 36% Nickel. Invar 36 has a thermal rate of expansion approx 1/10 of Carbon Steel at temps above 400°F. Invar 36 is used in electronic and radio devices where one must keep dimensional changes to a minimum. Invar 36 is available in round bar, sheet, plate and strip.