1.4310, NS, NS 14310, Stainless steels - Ferritic/austenitic chromium-nickel-molybdenum-steel 14310, NS- EN 10088-1, Stainless steels - Part 1:List of stainless steels, NS- EN 10088-3, Stainless steels - Part 3:Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes, NS- EN 10088-2, Stainless
BS EN 10088 _Information - Roy MechMatter Index Index to Steel Info Pages Information On British Standard Steels BS EN 10088 Important Notes:All information on this page has been interpreted from the relevent standards, books, other web sites, andl leaflets.
Contact Acerinox Headquarters. map icon C/ Santiago de Compostela nº 100. 28035 Madrid. phone icon (+34) 91 398 51 00 / 91 398 51 02. fax icon (+34) 91 398 51
Spring strip steel - Sandvik Materials TechnologyThe Sandvik spring steel program covers the size ranges below. Standard dimensional tolerances are according to the standard EN 10088-1. Our spring steel is normally supplied with a bright-rolled surface. Other types of surfaces, such as bright-annealed, dull, polished or
Stainless Steel - Austenitic - 1.4301 (304) Sheet and Stainless steel types 1.4301 and 1.4307 are also known as grades 304 and 304L respectively. Type 304 is the most versatile and widely used stainless steel. It is still sometimes referred to by its old name 18/8 which is derived from the nominal composition of type 304 being 18% chromium and 8% nickel.
1.4016 (430) Sheet and Plate. Stainless steel type 1.4016 is also commonly known as grade 430. Type 430 stainless steel combines good corrosion resistance with good formability and ductility. It is a ferritic, non-hardenable plain Chromium stainless steel with excellent finish quality.
Stainless Steel for Spring Application - EN10151 BS5770 With the exception of austenitic grade 1.4369 (X11CrNiMnN19-8-6), the grade compositions are covered by EN 10088-2. The composition of grade 1.4369 has been designed to keep the steel non magnetic in all conditions. The EN 10151 has a more comprehensive scope than BS5770:4.
Stainless Steel:Tables of Technical PropertiesStainless Steel:Tables of Technical Properties Materials and Applications Series, Volume 5. Chemical and physical properties are in accordance with EN 10088-1:2005 Mechanical properties are in accordanc e with EN 10088-2:2005, except for he 1 0 X10CrNi18-8 1.4310 301 0,05 to 0,15 2,00
Dimensions and tolerances The currently deliverable rust, acid and heat-resistant stainless steels. Dimensional ranges Thickness Width 0.05 - 1.5 a mm 3 - 650 mm a Strip thicknesses of up to 2 mm, rolled to tensile strength, are available upon request. Limit dimensions of the nominal width according to DIN EN ISO 9445-1
Stainless steel - Sennhenn GmbHKontakt. Sennhenn GmbH Elseyer Straße 56 58119 Hagen, Deutschland. Telefon:+49 (0) 2334 44240 Telefax:+49 (0) 2334 442422. E-Mail:[email protected]
Stainless steel strip - VINCOSTAINLESS STEEL STRIP EN 10088 GENERAL APPLICATIONS Stainless steel strip EN 10151 for springs Symbol classificat ion Numerica l European Standard (EN) Equivalen t X10CrNi18-8 1.4310 Mo EN 10088-2 301Mo - - X2CrNi18-9 1.4307 EN 10088-2 304L SUS304L - X5CrNi18-10 1.4301 EN 10088-2 304 SUS 304 0Cr19Ni9
Chemical composition % of steel X10CrNi18-8 (1.4310):EN 10088-2-2005 Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast. New opportunities for buyers! Post free buying requirement of steel
datasheet spring steel strip 1.4310Data Sheet Spring Steel Strip 1.4310 Page 1 of 3 Material Code X10CrNi18-8 (previous:X12CrNi17-7) Material Number 1.4310 (~ AISI 301) Quality according EN 10151 Tolerances according EN ISO 9445 Chemical analysis (in %) according EN 10151 C 0,01 to 0,15 Si max. 2,00 Mn max. 2,00 P max. 0,045 S max. 0,015 N max. 0,11 Cr 16,00 to 19,0 Mo max. 0 Datasheet for Steel Grades Specialsteel 1Datasheet for Steel Grades Specialsteel 1.4310 1.4310 Standard Number:ITEM Standard Number Descriptions 1 BS EN 10088-1 Stainless steels - Part 1:List of stainless steels 2 BS EN 10088-2 Stainless steels - Part 2:Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes