The 3.5 mm LCP Low Bend Medial Distal Tibia Plate is part of the Synthes locking compression plate (LCP) system that merges locking screw technology with conventional plating techniques. The Combi holes in the LCP plate shaft combine a dynamic compression unit (DCU) hole with a locking screw hole.
Bilateral clavicle non-unions treated with anteroinferior The Locking Compression Plate (LCP) is a new screw-plate system that offers the possibility of inserting conventional and locking head screws into the specially designed combination holes.
This study compared in vitro monotonic and cyclic mechanical properties of equine proximal interphalangeal joint arthrodeses stabilized using an open or closed technique combined with axial 4.5 mm narrow limited-contact dynamic compression plate (LC-DCP) or 4.5 mm narrow locking compression plate (LCP).
DePuy Synthes Small Frag Small Fragment J&J Medical The Synthes Small Fragment Locking Compression Plate (LCP) is part of plate and screw system that merges locking screw technology with conventional plating techniques. Locking screws provide the ability to create a fixed-angle construct while utilizing familiar AO plating techniques.
Fracture fixation:plate technique in dogs Vetlexicon FIXIN locking plates - Trauma Vet. Uses. Plate function. Compression plating:Load sharing function. Eccentrically loaded screws cause axial compression of the fracture interface as screws are tightened. Only the DCP, LC-DCP and LCP plates are specifically designed for this:Other than the hybrid LCP, this function is limited to non-locking
Apr 22, 2016 · 1. AOTrauma Principles Course Fracture fixation using the locking compression plate (LCP) Michael Wagner, AT 2. Learning outcomes Understand the different functions of conventional and locking head screws. Understand the different concepts of fracture fixation using locking compression plates.
Locking plate fixation in distal metaphyseal tibial The 4.5-mm limited-contact locking compression plate (LC-LCP) was used in 33 fractures, the metaphyseal LCP in 27 fractures and the distal medial tibial LCP in the remaining 20 fractures.
Locking plates in veterinary orthopaedicsLocking Compression Plate (LCP) The LCP permits use of angled conventional (compression) screws and fixed-angle locked screws through its patented combi-hole design (Figure 3). The combi-hole is a combination of a DCP hole and a locking hole allowing the surgeon to place either a compression or a locked screw. This versatility allows the surgeon
Plate features The Locking Compression Plates (LCP) have the following LC-DCP features: 80° of longitudinal screw angulation 14° of transverse screw angulation Uniform hole spacing Load (compression) and neutral screw positions Locking compression plates have combination locking and compression holes (Combi holes).
Surgical management of patients with tibial plateau This is a study of 40 cases of tibial plateau fracture in adults and elderly treated by proximal tibial locking compression plate (LCP) using MIPPO during the study period. All cases were available for follow up. Out of these, the maximum were in the age group of 35-60 years (n = 33, 82.5%). There wereLCP Proximal Tibial Plate 3.5. Part of the Synthes Small The Locking Compression Plate (LCP) has combi-holes in the plate shaft which combine a dynamic compression unit (DCU) hole with a locking screw hole. The combi-hole pro- vides flexibility of axial compression and locking capability throughout the length of the plate shaft. LCP Proximal Tibial Plate